Description
speedyevil01 is one of the fast-growing automotive aftermarket parts online providers in America. With more than 8 years experience in the industry, All parts will meet or exceed OE specifications, which will be an ideal choice to replace your broken parts. FITMENT: Fit for 2000-03 Toyota Tundra Heater Blower Motor with Fan Cage Fit for 2004-06 Toyota Tundra Access Cab Heater Blower Motor with Fan Cage Fit for 2004-06 Toyota Tundra Regular Cab Heater Blower Motor with Fan Cage Replaces Part Numbers: 615-58482 700060 871030C010 TO3126113 How to replace with new HVAC blower motor? 1 Always wear eye protection and start with installation tools. 2 Locate the HVAC blower motor under the passenger side dash. Removing the dash may be necessary to access the blower motor on some vehicles. (Note: On older vehicles, the blower motor may be located in the engine compartment on the passenger side firewall.) 3 Disconnect the blower motor electrical connector. 4 Remove the retaining screws to the blower motor assembly. 5 Remove the box and blower motor assembly. 6 Remove the blower motor retaining screws. Remove the motor from the box. 7 Compare the new blower motor to the old one to verify that you have the correct part. Install the new motor into the box and tighten the retaining screws. Re-install the blower motor assembly. 8 Connect the blower motor electrical connector. 9 Operate the heating and A/C system. Verify that the blower motor operates at all speeds and that the system produces hot and cold air.