Description
Drivetrain Configuration: A 4-wheel drive axle system typically consists of a transfer case, front and rear axles, differentials, and drive shafts. The transfer case distributes power from the engine to both the front and rear axles. Power Distribution: In a 4WD system, torque is distributed to all four wheels simultaneously. This allows for improved traction and handling in various driving conditions, especially off-road, snowy, or slippery surfaces. 48V 1000W brushless DC differential motor Voltage(V): 48V Output Power:1000W Commutation: Brushless Speed(RPM): 4800rpm Rated current:18-35A Gear Ratio: 9.5:1 Torque: 2.62Nm High Speed : 20mph / Medium Speed : 16mph / Low Speed: 10mph 40" Differential Rear Axle Drive Shaft kit Axle Length: 40 inch Comes with pair axles Package Include: 2x Rear differential Axles 2x 1000w 48v brushless motor 2x 48v 1000w speed controller 1x brushless wiring harness 1x ignition key switch 1x 3 speed switch 1x throttle pedal 1x brake switch 1x charging port 1x terminal block 1x forward reverse switch 1x power indicator 1x rear brake caliper 1x front brake caliper 2x disc rotors for front brake caliper 1x 25ah air switch 1x4 wheel drive axle kit assembly 1x upper / lower suspension swingarm 4x tie rod end 8x Mount Bracket 1x steering wheel 1x steering rack shaft assembly 4x 12v battery 1x 48v charger 2x250mm front shock 4x 16x8-7 wheels 2x spindle knuckle 2x 3 stud wheel hubs Instruction video, please check this link https://youtu.be/RoZE1SYAxHo